P-Lead 4 kg +/-
P-Weights are screwed directly into the fold of the backplate and represent an optimally centered weight system very close to the body. Optimal for a good weight distribution.
The lead is trapetzformig cast so that it fits optimally into the fold of the Backplate. Please note the required width of the fold.
The dimensions:
Hole spacing centre to centre approx. 28 cm
Hole centre to outer edge below / above approx. 37 mm
Width of the P-lead: the trapezium at the bottom approx. 33 mm wide and at the top approx. 65 mm wide.
P-lead is about 1.7 to 2.3 cm thick by weight
If necessary longer screws / threaded bolts are necessary for the assembly that the lead in the screw area is approx. 5 -6 mm thick. You can find both in our shop.
Lead is very soft so that the P-lead can bend a little during transport despite the outer packaging. However, by careful and even. slow bending it goes back to the desired shape without any problems. Feel free to contact us if you have any questions.
Due to production, the two mounting holes may be slightly out of round. This is not avoidable and not a reason for complaint.
| Item weight appr.: |
4,00 kg
|
| Content: |
4,00 kg
|
| german article name: |
P-Blei 4 kg +/- |
| spanish article name: |
P-plomo 4 kg /- |
There are no reviews yet.
