SI TECH Inflation Valve SHELL 22510, freely rotatable, Standard Inflatornippel 7,8 mm
- Swiveling 360°
- Nipple cover to prevent penetration of particles
- Low pushbutton
- Large guide rail
- connection nipple for standard inflator hose ( 7.8 mm, as with jacket / wing)
- width approx. 65 mm
- height approx. 41 mm
Thread diameter approx. 33 mm
The required hole diameter in the suit is approx. 33 mm.
Due to the thread length on the valve, we recommend installing this valve up to material thicknesses of 5 mm
There are no reviews yet.